Conext XW PRO 6848 6,800W 48V Manual
Table Of Contents
- Safety Information
- Label Symbols
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Pre-Installation Planning
- Wiring
- Removing the AC Access Panel and PDP Internal Faceplates
- Communication Ports and BTS Port
- Wiring the Conext XW Pro with a PDP
- Basic Functional Test – Single Inverter
- Wiring Additional Conext XW Pro units with a PDP
- Basic Functional Test - Multiple Inverters
- Wiring the Conext XW Pro Inverter/Charger without a PDP
- Communication
- Access Installation
- Specifications
- Wiring Diagrams
- Converting Split-phase to Single-phase
Conext MPPT 60 150 Solar Charge Controller
Part Number 865-1030-1
The Conext MPPT solar charge controller is a photovoltaic (PV) charge controller that
tracks the maximum power point of a PV array to deliver the maximum available current
for charging batteries.
For more information, go to https://solar.schneider-electric.com.
Figure 5 Conext MPPT 60 150
Conext MPPT 80 600 Solar Charge Controller
Part Number 865-1032
The Conext MPPT solar charge controller offers an industry-first set of integration
features and top performance that allows for large PV array systems to be easily installed
and connected to the battery bank at the lowest possible cost.
For more information, go to http://solar.schneider-electric.com.
Figure 6 Conext MPPT 80 600
!
Conext XW Pro Installation Guide Introduction
21 This manual is intended for use by qualified personnel 990-91228A-01