Conext XW PRO 6848 6,800W 48V Manual
Table Of Contents
- Safety Information
- Label Symbols
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Pre-Installation Planning
- Wiring
- Removing the AC Access Panel and PDP Internal Faceplates
- Communication Ports and BTS Port
- Wiring the Conext XW Pro with a PDP
- Basic Functional Test – Single Inverter
- Wiring Additional Conext XW Pro units with a PDP
- Basic Functional Test - Multiple Inverters
- Wiring the Conext XW Pro Inverter/Charger without a PDP
- Communication
- Access Installation
- Specifications
- Wiring Diagrams
- Converting Split-phase to Single-phase
Pre-Installation Planning
Pre-Installation Planning Conext XW Pro Installation Guide
2
Pre-Installation 25
Planning the Installation 25
Installation Tools and Materials 25
Location 26
Clearance Requirements 26
Knockout Selection 28
Air Filter and AUX Port Connector Installation 29
Wall-Mounting 30
Installing the Mounting Plate 31
Wall-Mounting the Conext XW Pro and PDP 32
Installing the XW Conduit Box 34
Communications Network Preparation 36
Battery Bank Preparation 37
Battery Bank Requirements 38
Battery Cable Requirements 38
Torque Values 40
Torque Values for the Conext XW Pro 40
Torque Values for the Power Distribution Panel (PDP) 40
What's in This Chapter?