Conext XW PRO 6848 6,800W 48V Manual
Table Of Contents
- Safety Information
- Label Symbols
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Pre-Installation Planning
- Wiring
- Removing the AC Access Panel and PDP Internal Faceplates
- Communication Ports and BTS Port
- Wiring the Conext XW Pro with a PDP
- Basic Functional Test – Single Inverter
- Wiring Additional Conext XW Pro units with a PDP
- Basic Functional Test - Multiple Inverters
- Wiring the Conext XW Pro Inverter/Charger without a PDP
- Communication
- Access Installation
- Specifications
- Wiring Diagrams
- Converting Split-phase to Single-phase
Wire Size Torque Value
AWG mm
2
In-lbs N-m
14–10 1.63–2.59 35 4.0
8 3.26 40 4.5
6–4 4.11–5.19 45 5.1
3–2/0 5.83–9.27 50 5.6
Table 9Torque Values for the Power Distribution Jumpers in the PDP
Torque Value
Ft-lbs N-m
15 20.4
Table 10Torque Values for the Battery
Cables to each DC Bus in the PDP
Conext XW Pro Installation Guide Pre-Installation Planning
41 This manual is intended for use by qualified personnel 990-91228A-01