Conext XW PRO 6848 6,800W 48V Manual
Table Of Contents
- Safety Information
- Label Symbols
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Pre-Installation Planning
- Wiring
- Removing the AC Access Panel and PDP Internal Faceplates
- Communication Ports and BTS Port
- Wiring the Conext XW Pro with a PDP
- Basic Functional Test – Single Inverter
- Wiring Additional Conext XW Pro units with a PDP
- Basic Functional Test - Multiple Inverters
- Wiring the Conext XW Pro Inverter/Charger without a PDP
- Communication
- Access Installation
- Specifications
- Wiring Diagrams
- Converting Split-phase to Single-phase
Audience
This guide is intended for any qualified personnel planning to install the Conext XW Pro
inverter/charger and related system components.The qualified personnel have training,
knowledge, and experience in:
n Installing electrical equipment.
n Applying all applicable installation codes.
n Analyzing and reducing the hazards involved in performing electrical work.
n Installing and configuring batteries.
n Selecting and using Personal Protective Equipment (PPE).
Servicing of batteries must only be performed or supervised by qualified personnel with
knowledge of batteries and their required precautions. Keep unqualified personnel away
from batteries.
No responsibility is assumed by Schneider Electric for any consequences arising out of the
use of this material.