User Manual

12
Easy UPS SRV Series Extended Runtime 1000VA, 2 000VA, 3000VA
Notifications
Display code
Description
Solution
Battery is not connected.
Connect battery to the UPS. See “Start Up” on
page 8 in this manual.
UPS Display Parameters
Operational data displayed in the display panel is given in the table.
Navigate using the o r button.
Parameter
Units
Indicator Icons
Output voltage
Vac
OUT, V
Output frequency
Hz
OUT, Hz
Input voltage
Vac
IN, V
Input frequency
Hz
IN, Hz
Battery voltage
V DC
BAT, V
Ambient temperature
° C
NUMBER, C
State of battery charge
%
BAT, %
Load level in percentage (Maximum of
Watts or VA)
%
OUT, %
Load level in kVA
kVA
OUT, kVA
Total Ah capacity of connected battery
Ah
BAT, Ah
Remaining On Battery runtime
Minutes
BAT, Min
Configuration
Configure UPS Parameters
Follow the steps to configure parameters in the UPS:
1.
Press the button.
2. Press the o r button to navigate to “Set”.
3.
Press the button.
4.
Navigate through the parameters using the o r button.
5.
Press the button to edit a parameter. Icons start flashing to indicate the editing.
6. Press the o r button to navigate between the options available for the selected
parameter.
7. Press the button to select the option or button to abort the editing of current parameter.
Flashing of icons stops after this.
8. Press the o r button to navigate between parameters.
9. Press the button to exit menu navigation.