User Manual

9
Easy UPS SRV Series Extended Runtime 1000VA, 2 000VA, 3000VA
Connect and install management software
Easy UPS SRV is provided with SchneiderUPS management software for unattended operating system shutdown,
UPS monitoring, UPS control and energy
reporting. The following diagram is a
representation of a typical server
installation.
1. Connect the USB cable from the rear
of the UPS to the protected
device such as a server.
2. For a server or other device with an
operating system, load the
SchneiderUPS CD and follow the on-
screen set-up instructions.
3. A built-in serial port is
also available for additional
communication options with serial
cable.
4. Even more communication options are
available via the built-in intelligent
card slot. Refer to www.apc.com for more information.
Operation
Using The Display
These Easy UPS models are equipped with an intuitive and configurable LCD display. This display complements the
software interface as they convey similar information and either may be used to configure the UPS settings.
The display consists of the following keys and indicators: