Installation Guide

975-0691-01-01 Revision B 2-11
Wall Mount
To mount the Battery Monitor on a wall:
1. Choose the location for mounting the device.
2. Using the template in the
Conext Battery Monitor Quick Start Guide, mark the
mounting holes on the wall with a pencil.
Note: The holes must be at the same height and 2.36 in. (60 mm) apart.
3. Insert the two anchors and mounting screws supplied in the marked
locations on the wall, leaving a space of approximately 0.13 in. (3.3 mm)
between the wall and screw head. If you are mounting the Battery Monitor on
concrete, the supplied anchors and mounting screws are not suitable. Use
two mounting screws that are equivalent to #6 screws.
2.36 inch
(60 mm)
0.13 inch
(3.3 mm)
Figure 2-2 Wall mounting the Battery Monitor