Installation Guide

2-12 975-0691-01-01 Revision B
4. Place the Battery Monitor on the mounting screws, and confirm a snug fit
before going to the next step.
5. Connect the wiring and cables. See the Battery Monitor Quick Start Guide
Section “Cable Connections” for correct wiring.
Panel Mount
The Battery Monitor has a front frame for slide-in mounting into a panel cutout.
Standard dimensions of a panel mount meter are 3.6 x 3.6 in. (92 x 92 mm).
Mounting screws are hidden after installation with a snap-fit cover plate.
To panel mount the Battery Monitor:
1. Using the panel mounting template in the Battery Monitor Quick Start Guide,
mark the mounting holes on the wall with a pencil and trace the area to cut
out.
2. Cut out a square for the Battery Monitor as per the panel mounting template.
3. Pre-drill four holes as per the panel mounting template.
Figure 2-3 Wall mounting the Battery Monitor (continued)