Installation Guide

975-0691-01-01 Revision B 2-15
To mount the Battery Monitor on a DIN Rail:
1. Choose the location for mounting the device.
2. Use a Phillips head screwdriver to screw the DIN rail clip onto the back panel
of the Battery Monitor.
3. Mount the Battery Monitor on the DIN rail at an upward angle then push down
and in to clip to the rail.
4. Connect the wiring and cables. See “Electrical Wiring” on page 2–16 for
details.
Figure 2-6 Attaching the DIN rail clip to the Battery Monitor
Figure 2-7 DIN Rail mounting the Battery Monitor