Installation Guide

975-0691-01-01 Revision B i
About This Guide
Purpose
The purpose of this Owner’s Guide is to provide explanations and procedures for
installing, operating, configuring, maintaining, and troubleshooting the Conext
Battery Monitor.
Scope
The Guide provides safety guidelines, planning, and setup information,
procedures for installing the Battery Monitor, as well as information about
configuring, monitoring, and troubleshooting the unit.
Audience
The Guide is intended for use by anyone who plans to construct, install, or
operate a system which includes the Battery Monitor. Certain configuration tasks
should only be performed by qualified personnel in consultation with your battery
manufacturer or system designer. Electrical equipment should be installed,
operated, serviced, and maintained only by qualified personnel. Servicing of
batteries must only be performed or supervised by qualified personnel with
knowledge of batteries and their required precautions. Qualified personnel have
training, knowledge, and experience in:
• Installing electrical equipment
• Applying applicable installation codes
• Analyzing and reducing the hazards involved in performing electrical work
• Installing and configuring batteries
• Selecting and using Personal Protective Equipment (PPE)
No responsibility is assumed by Schneider Electric for any consequences arising
out of the use of this material.
Organization
This Guide is organized into five chapters and an appendix.
Chapter 1, “Overview”, describes physical features of the Battery Monitor and
introduces the user interface.
Chapter 2, “Installation”, describes how to install, wire, and connect the Battery
Monitor to your network.
Chapter 3, “Configuration”, describes how to configure and change device
settings and upgrade firmware.
Chapter 4, “Monitoring”, describes how to monitor LCD indicator lights (LCDs)
and device levels.
Chapter 5, “Troubleshooting”, describes how to interpret events and alerts.
Appendix A, “Specifications”, contains the electrical, mechanical and
environmental specifications for the Battery Monitor.