Installation Guide

2-20 975-0691-01-01 Revision B
2AT Fuses are pre-wired to V+, Vm, VA1, VA2. L+, and L- are wired together as a
twisted pair, while the remaining wires are individual.
To wire the battery terminal to the Pre-scaler Board:
1. Connect the black (V-) and grey (Vm-) wires to the negative (—) endpoint
battery terminal.
2. Connect the red (V+) and brown (Vm) wires to the positive (+) endpoint
battery terminal.
GH F
E
D C
A
B
Pre-Scaler Port
Pre-wired
Connections
Battery Sense Cable
Battery Sense
Cable Wires
Twisted Pair
Figure 2-11 Pre-scaler terminals