Installation Guide

975-0691-01-01 Revision B iii
Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS - DO NOT DISCARD
This guide contains important safety instructions for the Conext Battery Monitor
that must be followed during installation and configuration procedures. Read and
keep this Installation Guide for future reference.
Read these instructions carefully and look at the equipment to become familiar
with the device before trying to install, operate, service or maintain it. The
following special messages may appear throughout this bulletin or on the
equipment to warn of potential hazards or to call attention to information that
clarifies or simplifies a procedure.
The addition of this symbol to a “Danger” or “Warning” safety label
indicates that an electrical hazard exists which will result in personal
injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER
HAZARD OF ELECTRIC SHOCK
• Read all instructions, cautionary markings, and all other appropriate
sections of this manual before installing, operating, troubleshooting or
performing maintenance on the Battery Monitor.
• Exercise extreme caution at all times to prevent accidents.
• These instructions are for use by qualified installers only.
Failure to follow these instructions will result in death or serious injury.