Installation Guide

975-0691-01-01 Revision B v
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Remove watches, rings, or other metal objects.
• This equipment must only be installed and serviced by qualified electrical
personnel.
• Keep sparks and flames away from the batteries.
• Use tools with insulated handles.
• Wear protective glasses, gloves and boots.
• Do not lay tools or other metal parts on top of batteries.
Failure to follow these instructions will result in death or serious injury.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Servicing of batteries must only be performed by qualified personnel
knowledgeable about batteries and the required precautions. Keep
unqualified personnel away from batteries.
• Disconnect the charging source prior to connecting or disconnecting
battery terminals.
• Use with lead-acid batteries: Flooded, Gel, and AGM types only.
• The included shunt in the box is rated for 500 A, 50 mV. It can handle 350 A
continuously and 500 A for 5 minutes. For systems designed to pass more
current than rated, use a higher capacity shunt.
Failure to follow these instructions will result in death or serious injury.
WARNING
UNINTENDED OPERATION
The use of this product with Modbus communications requires expertise in the
design, operation, and programming of the device. Only qualified persons
should program, install, alter, and commission this product.
When writing values to the device, ensure nobody else is working with the
device.
Failure to follow these instructions can result in death or serious injury,
and/or equipment damage.