User Manual

XW Connection Kit for Additional Inverters
XW Series Power Distribution | 4
XW Installation Kit for INV2 INV 3 PDP
Part number 865-1020-02
General Specifications
Product dimensions (H x W x D) 22.9 x 40.6 x 21.0 cm (8.5 x 16.0 x 8.3 in)
Shipping dimensions (H x W x D) 44.5 x 33.3 x 30.5 cm (17.5 × 13.0 × 12.0 in)
Shipping weight 10.5 kg (23.1 lb)
The XW Connection Kit is used for connecting a second or third XW inverter to a Power
Distribution Panel (PDP). One XW Connection Kit is used for each of the additional XW Inverters.
The XW Connection Kit is designed for easy installation of multiple inverter systems and includes:
• XW Conduit Box
• Includes a main 250A DC breaker for the battery
• One pair #4/0 AWG battery cables, 64” length to reach from the third inverter to the PDP
• Five #6 AWG cables for AC In (grid), AC Out (load), and neutral
• AC Sync and Xanbus cables for network communication
• DC positive bus bar for up to 3 DC disconnect breakers for installation in the PDP
XW Conduit Box
XW Conduit Box
Part number 865-1025-01
General Specifications
Product dimensions (H x W x D) 22.9 x 40.6 x 21.0 cm (8.5 x 16.0 x 8.3 in)
Shipping dimensions (H x W x D) 44.5 x 33.0 x 30.5 cm (17.5 × 13.0 × 12.0 in)
Shipping weight 4.6 kg (10.0 lb)
The XW Conduit Box mounts directly to the bottom of an XW inverter to safely protect end-users
from inadvertent contact with wiring or connections. The XW Conduit Box is bundled with the
Power Distribution Panel and the XW Connection Kit, however, it is also available for order on its
own.
The Conduit Box is easily secured with two screws provided on the bottom of the inverter. The
bottom flange of the conduit box can then be attached (fasteners not provided) to the wall to
complete the installation. The front panel of the conduit box can be removed by removing the
two screws on the front, allowing ample space to make all necessary wiring connections.
In multi-unit installations, the sides of adjacent conduit boxes can be removed to create an
effective raceway with lots of volume to run AC and DC inverter cabling. The conduit box also
includes multiple cable strap points, allowing the final installation to look clean and professional.
In addition, an internal sheet metal barrier is included to keep communications wires separate
from AC and DC power wires.