Conext Gateway Installation

For details on specific models supported, see Specifications on page 1. The Conext
Gateway supports up to a maximum of 20 devices on a Xanbus network depending on
the device types.
Material List
Figure 1 Material list
1
4
3
2
Attach the
antennas before
turning on the unit.
NOTE:
n Do not discard the packaging box.
n The Wi-Fi password is printed on the unit.
n Install the antennas before turning on the unit.
1 Conext Gateway unit
2 AC/DC power adapter with interchangeable plugs
3 Ethernet cable (CAT5e)
4 Network terminator
not shown
•8GB Micro SD card
•75mm DIN rail
•CAN terminator
•26-pin connector (see Physical Features on page 13)
Overview Conext Gateway Conext Gateway Owner's Guide
975-0806-01-01 12