Conext Gateway Installation

To change the password after the initial log in:
Figure 14 Change password setting
1. Click Setup > Manage Passwords > Change Passwords.
2. Select the User name type. Note: Admin-level can change all passwords. User-level
can change User and Guest passwords. Guest-level cannot change any passwords.
l Admin
l User
l Guest
3. Enter the Old password.
4. Enter the New password.
5. Enter the Confirm password.
6. Click Apply. Your settings will be immediately applied.
Changing Conext Gateway Settings
The procedures for configuring the other Conext Gateway Settings are described in the
following sections.
To change Conext Gateway settings:
1. In the main menu bar, click Setup>Configuration.
The Configuration settings appear in the main display area.
2. Click any of the following settings.
a. Plant setup - see Plant Setup on page 38
b. Time setup - see Time Setup on page 38
c. Import & export settings - see Import and Export Settings on page 39
d. Units - see Units on page 40
e. Modbus settings - see Modbus Settings on page 40
f. Restart Conext Gateway - see Restarting the Conext Gateway on page 41
g. Install package - see Install Package on page 42
Conext Gateway Conext Gateway Owner's Guide Configuration
37 975-0806-01-01