Conext Gateway Installation

Units
This setting allows you to change the standard unit of measurement used in solar
irradiance, temperature, and wind speed.
Figure 18 Units setup screen
To change units:
1. In the main menu bar, click Setup>Configuration.
The Configuration settings appear in the main display area.
2. Click Unit.
Currently, only Temperature can be changed to either celsius or farenheit.
3. Save the settings by clicking Apply .
Alternatively, ignore the changes by clicking Cancel.
Modbus Settings
This setting allows you to change the Modbus serial port communication settings.
Figure 19 Modbus settings screen
Configuration Conext Gateway Conext Gateway Owner's Guide
975-0806-01-01 40