Conext Gateway Installation

Events
The events detected and monitored by Conext Gateway vary in type. The types of
events are categorized into warnings and detected faults. Warnings are displayed as
orange icons with an exclamation point. Detected faults are displayed as red icons with
an exclamation point.
When devices detect an event that usually resolves by itself, it is still reported to Conext
Gateway and logged. It is logged under Historical(see Figure 26 However, events that
happen repeatedly escalate to a fault or sometimes the device detects a fault, such as a
ground fault. When a fault is detected, it is also reported to Conext Gateway and logged.
If service intervention is required, it is logged under Active (see Figure 25 ). It remains
there until service is performed. Also, if user intervention is required, such as remotely
resetting a device, the event is logged under Active and remains there until the user is
able to perform the necessary action.
Conext Gateway Conext Gateway Owner's Guide Troubleshooting
53 975-0806-01-01