Conext Configuration Tool Manual

Device Configuration
3–32 975-0720-01-01
This manual is for use by qualified personnel only
Multi-Unit AGS Configuration
AGS Basic Configuration provides the means to identify multiple AGS units
within the same configuration.
Figure 3-28 AGS Basic Configuration
Table 3-13 AGS Trigger Settings
Setting Description
Device Name Gives each Xanbus-enabled device a unique identifiable name. This makes each
device easier to identify when multiple Xanbus-enabled devices are connected
together.
The default device name for the AGS is “XW AGS.”
Device Number Gives each Xanbus-enabled device a unique identifiable number in addition to the
name. This provides the means to use the same name, but different numbers for
similar devices (such as XW AGS 01 and XW AGS 02).
AC Output
Association
Tells the AGS what load to monitor for AC load triggers.
AC Input
Association
Tells the AGS what other AC source or grid the Conext XW+ Inverter/Charger is
connected to. The AGS uses this setting to stop the generator once the Conext XW+
Inverter/Charger transfers Configuration from the generator to the grid or alternative
AC source.
Battery
Association
Tells the AGS which battery bank to use for the charger based triggers.