Conext Configuration Tool Manual

Device Configuration
3–34 975-0720-01-01
This manual is for use by qualified personnel only
Basic Configuration
Basic configuration includes setting the device name and number, as well as
screen appearance and temperature display preference.
Figure 3-30 SCP Basic Configuration
Table 3-14 SCP Basic Configuration Settings
Setting Description
Device Name Allows you to customize the display name of the SCP.
Device
Instance
Sets the device number.
Brightness Adjusts the brightness of the display to suit interior light conditions and enhance
visibility.
Contrast Adjusts the contrast of the display to suit viewing angle and enhance visibility.
Light Timer Sets how long the backlight remains on after the last button press on the SCP.
Button Beep Enables buttons to beep when pressed.
Fault Alarm Enables an alarm to sound when a fault occurs.
Temperature
Units
Selects the temperature scale the SCP displays.
Date and Time Sets the system date and time. To synchronize the time with the computer instead of
setting it manually, click Synchronize.
If a Conext ComBox is installed on your network, use the ComBox to control date and
time settings. For more information, see the Conext ComBox Owner’s Guide.