Conext Configuration Tool Manual

Configuring the Conext Battery Monitor
975-0720-01-01 3–37
This manual is for use by qualified personnel only
Battery Configuration
Battery configuration allows you to configure basic and advanced settings of
your Battery Monitor.
Figure 3-32 Battery Monitor Battery Configuration
Table 3-15 Battery Configuration Settings
Setting Description
Battery
Capacity
Battery’s capacity in Amp-hours (Ah).
Nominal
Discharge Rate
The discharge rate (in hours) at which the battery manufacturer rates your battery’s
capacity.
Discharge Floor Reference point at which the battery needs to be recharged. When SOC< this value
the Charge battery indicator starts flashing, the time remaining shows 0:00 & SOC bar
is empty.
Charger Float
Voltage
Battery charger’s float voltage, which is the last stage of the charging process.
Auto-
Synchronization
Time
This is the time the Auto-sync parameters F1.0 and F1.1 must be met in order to
consider the battery as fully charged.