Conext Configuration Tool Manual

Device Configuration
3–38 975-0720-01-01
This manual is for use by qualified personnel only
Battery Temperature Configuration
Battery temperature configuration allows you to configure the temperature
settings of your Battery Monitor.
Auto-
Synchronization
Sensitivity
Changes sensitivity of the auto-sync function. If it takes too long to activate the
synchronization function, lower this value. If it synchronizes too early, increase this
value for a later synchronization.
Peukert
Exponent
Represents effect of reducing battery capacity at higher discharge rates.
Self Discharge
Rate
Rate at which the battery loses capacity by itself, when it is not used.
Charge
Efficiency
Factor Mode
Ratio between the energy removed from a battery during discharge & the energy
used during charging to restore original capacity.
Time
Remaining
Average Filter
Represents the effect of reducing battery capacity at higher discharge rates.
Table 3-15 Battery Configuration Settings
Setting Description
Figure 3-33 Battery Monitor Battery Temperature Configuration
Table 3-16 Battery Temperature Settings
Setting Description
Nominal
Temperature
The temperature at which the battery manufacturer rates the battery’s capacity.
Default
Temperature
Default temperature setting.