Conext Configuration Tool Manual

Configuring the Conext Battery Monitor
975-0720-01-01 3–39
This manual is for use by qualified personnel only
Hardware Configuration
Hardware configuration allows you to configure the hardware settings of your
Battery Monitor.
Capacity
Temperature
Coefficient
Percentage that battery’s capacity changes with temperature.
Temperature
Units
Select display between °C/°F.
Table 3-16 Battery Temperature Settings
Setting Description
Figure 3-34 Battery Monitor Hardware Configuration
Table 3-17 Hardware Settings
Setting Description
Shunt Amp
Rating
Amp rating of connected shunt.
Shunt Voltage
Rating
Specifies the voltage rating. The Battery Monitor supports only 50 mV and 60 mV
shunts.
Backlight Mode Period of backlight activation in seconds after key-press.
Setup Lock When set to “ON”, all Push buttons on physical unit are locked.