Conext Configuration Tool Manual

Device Configuration
3–40 975-0720-01-01
This manual is for use by qualified personnel only
Multi-Unit Configuration
Multi-unit configuration allows you to select the battery association and set the
device name and instance of the Battery Monitor.
Figure 3-35 Battery Monitor Multi-Unit Configuration
Setting Description
Device Name Specifies the displayed name of the Battery Monitor. Gives each Xanbus-enabled
device a unique identifiable name. This makes each device easier to identify when
multiple Xanbus-enabled devices are connected together.
Device
Instance
Specifies the number associated with the Battery Monitor which will appear beside
the Device Name in the application. This provides the means to use the same name,
but different numbers for similar devices (such as BattMon 01 and BattMon 02). If
there is more than one Battery Monitor running on the system, this number must be
manually changed and updated for subsequent devices. The device must be in
standby mode to update this setting.
Battery
Association
Tells the Battery Monitor which battery bank to use for the charger based triggers.
Device must be in standby mode to update this setting.