Conext Configuration Tool Manual

Upgrading Firmware
5–2 975-0720-01-01
This manual is for use by qualified personnel only
Introduction
The firmware upgrade feature allows Conext Configuration Tool to upgrade the
firmware of any Xanbus-enabled device on its connected system. It is designed
to be simple to use so that all devices on the network can be upgraded with the
latest available firmware appropriate to the device.
Note: A firmware upgrade may cause some configuration settings to change or
revert to their default settings.To avoid deletion of your preferred configuration
settings, save all device settings before performing a firmware upgrade on any
device, and reload the settings after the firmware upgrade is completed.
Downloading Firmware Files
The latest firmware is available from SEsolar.com. Download the latest firmware
file and save it to a local directory on your computer, for example
C:\User\AppData\Roaming\CnxtCfgTool\Firmware.
Starting Firmware Upgrade
You can upgrade your firmware, downgrade your firmware to a previously saved
version, or reload your current firmware by selecting Firmware Upgrade in the
Configure menu.
WARNING
LIMITATIONS ON USE
During the firmware upgrade process of any device on the Xanbus network, all
units on the network will cease output of power.
Do not use any device on the Xanbus network in connection with life support
systems or other medical equipment or devices.
Failure to follow these instructions can result in death or serious injury.
Figure 5-1 Configure Menu