Conext Configuration Tool Manual

Legacy USB-to-Xanbus Adapters
A–2 975-0720-01-01
This manual is for use by qualified personnel only
Installing Previous Versions of the USB-to-Xanbus
Adapter
Conext Configuration Tool is compatible with previous versions of the USB-to-
Xanbus adapter, as shown below.
USB-to-Xanbus adapter drivers
You will need an Installation USB flash drive containing the drivers appropriate for
your USB-to-Xanbus adapter. For more information, contact your local Schneider
Electric representative.
Xanbus Receive
Xanbus Send
USB Receive
USB Send
Xanbus Diagnostic Tool
Xanbus connector accepts a Xanbus cable
to connect to the Conext XW+ Inverter/
Charger system.
Indicator LEDs
USB cable connects to USB port on the
computer.
Figure A-1 Legacy USB-to-Xanbus Adapter