Conext Configuration Tool Manual

Legacy USB-to-Xanbus Adapters
A–4 975-0720-01-01
This manual is for use by qualified personnel only
3. Select Search for the best driver in these locations. Click the check box next
to Include this location in the search and select the Installation USB flash
drive.
Click Next.
4. If a Hardware Installation warning appears (“The software you are installing
for this hardware has not passed Windows Logo testing to verify its
compatibility with Windows XP”), click Continue Anyway. The Wizard will
begin software installation.
5. When the Wizard has completed installing the software, click Finish.
6. The USB-to-Xanbus adapter is now ready to use.
Windows 7
To install using Windows 7:
1. Connect the USB-to-Xanbus adapter to an available USB port on your
computer. A green indicator LED on the adapter will blink when it is
connected.
2. Insert the Installation USB flash drive into an available USB port on your
computer.
Xanbus Receive
Xanbus Send
USB Receive
USB Send
Xanbus Diagnostic Tool
Indicator LEDs