Conext Configuration Tool Manual

Introduction and Installation
1–4 975-0720-01-01
This manual is for use by qualified personnel only
❐ Xanbus network cable (14 ft./4.25 m)
❐ Installation USB flash drive, containing the following files:
• “Read Me” text file
• USB-to-Xanbus adapter driver software
• Conext Configuration Tool software
• Conext Configuration Tool Owner’s Guide PDF file (this manual)
• Release notes
• Legacy USB-to-Xanbus adapter driver software for older dongles
Power supply for
USB-to-Xanbus
adapter
The USB-to-Xanbus adapter is powered by the Xanbus network and your
computer’s USB port. If your installation requires an external power supply for the
USB-to-Xanbus adapter, compatible power adapters are available.
Schneider Electric recommends the following AC adapter for use with Conext
Configuration Tool:
• EMSA120150-P5P-SZ Wall Adapter (with interchangeable AC blades)
Schneider Electric Part Number: 0J-921-0023-Z
For more information, contact your local Schneider Electric Sales Representative.
Figure 1-3 Xanbus Converter (Back)
USB-to-Xanbus
adapter port