Conext Configuration Tool Manual

System Configuration
2–2 975-0720-01-01
This manual is for use by qualified personnel only
About the Configuration Wizards
The Conext Configuration Tool Configuration Wizard offers three methods for
configuring the system.
• Quick
–The Quick Configuration Wizard is intended to get the system up and
running quickly. It allows you to set Device Numbers, Connections, a System
Master, and all inverter/charger and charge controller settings required for a
working system. The Quick Configuration Wizard does not configure grid
support or generator support.
• Detailed
–The Detailed Configuration Wizard offers everything in the Quick
Wizard, as well as Grid Support and Generator Support settings.
• Multi-Cluster
–The Multi-Cluster Configuration Wizard offers everything in
the Detailed Wizard, as well as advanced options for multi-cluster systems
such as AC Associations, Advanced Battery Settings and Transfer Switch
Configuration.
Restoring
configuration from
a saved file
You can also restore your configuration from a previously saved or downloaded
system configuration file that contains settings for all devices. For more
information, see “Restoring a Configuration” on page 2–32.
Guidelines for Configuration Wizards
The following general guidelines apply when changing settings using the
Configuration Wizards.
• The initial values on the form are taken from the current configuration of the
device.
• Changed settings appear in red and do not take effect until you click Next.
• Clicking Reset to Current Settings loads the current settings from the device
back into the form.
Figure 2-1 Sample Configuration Wizard form