Conext Configuration Tool Manual

Using the Configuration Wizard
975-0720-01-01 2–23
This manual is for use by qualified personnel only
9. Set the XW Inverter/Charger Grid Support Settings.
The Grid Support Settings screen configures options for grid-tie operation.
AC1 Low
Voltage Cutout
Minimum acceptable input voltage level from the utility grid.
AC1 High
Voltage Cutout
Maximum acceptable input voltage level from the utility grid.
AC1 Low
Frequency
Cutout
Minimum acceptable utility grid input frequency.
AC1 High
Frequency
Cutout
Maximum acceptable utility grid input frequency.
AC2 Breaker
Rating
Sets the AC2 (Gen) breaker size, based on the size of the installed AC breaker. The
breaker size must not exceed the capacity of the generator. The charger limits the
maximum input current to this setting by derating its charging current.
AC2 Low
Voltage Cutout
Minimum acceptable input voltage level from the generator.
AC2 High
Voltage Cutout
Maximum acceptable input voltage level from the generator.
AC2 Low
Frequency
Cutout
Minimum acceptable generator input frequency.
AC2 High
Frequency
Cutout
Maximum acceptable generator input frequency.
Figure 2-24 XW Inverter/Charger AC Settings
Setting Description