Conext Configuration Tool Manual

About This Guide
iv 975-0720-01-01
This manual is for use by qualified personnel only
Chapter 3, “Device Configuration” describes how to use Conext Configuration
Tool to configure each device in the system.
Chapter 4, “System Logging” contains information and procedures to use the
Conext Configuration Tool system logging feature.
Chapter 5, “Upgrading Firmware” contains information about upgrading device
firmware using Conext Configuration Tool.
Appendix A, “Legacy USB-to-Xanbus Adapters” provides information about
installing older versions of the USB-to-Xanbus adapter.
Related Information
You can find more information about Schneider Electric as well as its products
and services at solar.schneider-electric.com
Disclaimer
This Conext Configuration Tool software is provided by Schneider Electric
Industries SAS ("Schneider Electric") to you free of charge. Schneider Electric
does not warrant that the software will operate uninterrupted, that it is free from
defects or errors, or that it is suitable for certain purposes. The software is used
at your risk and responsibility. SCHNEIDER ELECTRIC HEREBY DISCLAIMS ALL
WARRANTIES, WHETHER STATUTORY, EXPRESS, OR IMPLIED, INCLUDING
ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR
PURPOSE, AND ALL WARRANTIES ARISING FROM COURSE OF DEALING OR
USAGE OF TRADE. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE
FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS, EXPENSE OR CAUSE OF ACTION, WHETHER BASED IN CONTRACT,
WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, STATUTE,
OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS
OF BUSINESS, LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA,
OR FOR ANY OTHER PECUNIARY OR NON-PECUNIARY LOSS OR DAMAGE
ARISING OUT OF OR IN CONNECTION WITH THE INABILITY TO USE OR THE
MISUSE OF THE SOFTWARE, EVEN IF SCHNEIDER ELECTRIC HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.