Conext Configuration Tool Manual

Device Configuration
3–2 975-0720-01-01
This manual is for use by qualified personnel only
Configuring Devices
You can use Conext Configuration Tool to configure individual devices on the
Xanbus network. Conext Configuration Tool gives you access to the same device
settings that are available on the Conext System Control Panel (SCP).
From a device’s Basic Status window, you can configure individual settings for
that device.
Note: Use the Device’s Configure menus to configure individual settings that are
not available in the Configuration Wizards, such as the auxiliary outputs of the
Conext XW+ Inverter/Charger and the Conext MPPT 80 600 and MPPT 60 150
Solar Charge Controllers.
To open a device’s Basic Status window:
1. On the main screen, click the icon of the device you want to configure.
2. The Basic Status window for that device opens. Click Configure to view the
available menus for the device.
Figure 3-1 Network Devices
Figure 3-2 Basic Status Window