Conext Configuration Tool Manual

Device Configuration
3–14 975-0720-01-01
This manual is for use by qualified personnel only
Generator Support Configuration
Generator support allows power to be automatically drawn from the batteries to
assist an AC generator to support heavy loads (i.e. loads that exceed the
available current from the generator).
Generators have a limited output current and it is possible to reach this limit when
operating heavy loads. The inverter/charger can assist the generator when heavy
current demands load down the generator by supplying additional power from
the batteries.
Auxiliary Output Configuration
Auxiliary Output Configuration allows you to enable and configure the auxiliary
output. The auxiliary output provides 12 VDC at 250 mA to power a relay,
indicator LED or alarm. For more information, see the Conext XW+ Inverter/
Charger Owner’s Guide.
The settings on this screen change depending on the selected Auxiliary Output
Mode setting and the selected Trigger Source.
Figure 3-11 Inverter/Charger Generator Support Configuration
Table 3-6 Inverter/Charger Gen Support Settings
Setting Description
Generator Support
Mode
Turns the Generator Support feature on and off.
Generator Support
Current
Sets the generator load level at which the inverter supplies power from the
batteries to support the generator.