Conext Configuration Tool Manual

Device Configuration
3–24 975-0720-01-01
This manual is for use by qualified personnel only
Figure 3-21 Charge Controller Battery Configuration
Table 3-9 Charge Controller Battery Settings (Custom Settings in Gray)
Setting Description
Battery Type Selects the system battery chemistry and type: Flooded (default), AGM, Gel and
Custom.
If you select Custom, the Charger Configuration screen for configuring voltage
settings for each charging stage is displayed.
Battery Voltage Sets the nominal battery voltage for the system.
Battery
Capacity
Selects the system battery capacity in amp-hours.
Equalization
Support
Enables or disables the ability to enter an equalization cycle. Refer to the battery
manufacturer’s specifications to determine whether equalization is recommended.
Equalization
Voltage
Selects the equalization voltage. Consult your battery manufacturer for equalization
voltage setting.
Bulk Voltage Sets the bulk voltage for a custom battery type.
Absorption
Voltage
Sets the absorption voltage for a custom battery type.
Float Voltage Sets the float voltage for a custom battery type.
Battery
Temperature
Compensation
Battery temperature compensation for a custom battery type. This setting is the
reference that the battery temperature sensor uses to adjust the charging voltage
when the temperature falls above or below 25 °C.