Conext Configuration Tool Manual

Configuring the Conext Automatic Generator Start
975-0720-01-01 3–27
This manual is for use by qualified personnel only
Configuring the Conext Automatic Generator Start
The following section describes how to configure the Conext Automatic
Generator Start (AGS), an optional accessory that may not be installed in all
power systems.
To configure the Automatic Generator Start:
1. On the main screen, click the Automatic Generator Start icon:
The AGS Basic Status window opens.
2. In the Basic Status window, click Configure.
3. Click the settings category you want to configure.
The following settings categories are available on the AGS Configure menu:
• Generator
•Triggers
• Multi-Unit Configuration
• Save Configuration
• Restore Configuration
Basic Status
The Basic Status window shows the network status of the AGS, the state of the
generator, and the reason the generator was last stopped.
Figure 3-25 Conext AGS Configure Menu