Product Manual

Operation
3–6 975-0638-01-01 Rev E
Battery power during AC bypass When sufficient AC is detected by the
inverter/charger and the battery is sufficiently charged, the AC is automatically
passed through to the loads. However, if the battery is less than 12 V (for 24-volt
models), 24 V (for 48-volt model), or had been disconnected, the inverter/
charger will not pass grid AC through to the loads.
NOTICE
EQUIPMENT DAMAGE
Do not energize and operate the inverter/charger with an AC source before
connecting a battery. Do not rely solely on AC bypass power to provide energy
to connected loads. Always operate with a battery connected to the inverter/
charger.
Failure to follow these instructions can damage the inverter/charger.
ConextSW-NA-OwnersGuide.book Page 6 Thursday, July 23, 2015 3:26 PM