Product Manual

Operation
3–16 975-0638-01-01 Rev E
Changing Operational Settings
The following table shows the various settings you can change to effectively
operate the Conext SW inverter/charger.
To navigate to the Conext SW Setup menu:
1. From the System Status screen (see 1A), press Enter to view the Select
Device menu. Go to step 2.
Or
From the Conext SW Home screen (see1B), press Enter. The Conext SW Setup
menu appears.
2. Highlight the Conext SW device name, and then press Enter.
Figure 3-7 Navigate To Conext SW Setup Menu
Select Device
System Settings
CSW4024
Device 2
Device 3
Device n
XW SCP
Clock
CSW4024 00:Setup
Meters
Inverter
Search Mode
Charger
Force Chg State
Equalize
Mode
Clear Faults/Warnings
View Device Info
Basic Settings
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Operating]
System Status
Battery
BatLev
Load
AC1
13.8A 24.0V
E--F
1750W
240V 1750W
menu 12:53PM Aug 13
CSW4024 00: Home
Status
Battery
Load
AC In
Invert
-16.4A 26.2V
1750W
0.0V 0W
setup system
1A 1B
2
ConextSW-NA-OwnersGuide.book Page 16 Thursday, July 23, 2015 3:26 PM