Installation Guide

Xanbus Network System
975-0639-01-01 Rev D 1–9
This guide for use by qualified personnel only
Xanbus Network System
Xanbus System
The Xanbus system includes the Conext SW and other Xanbus-enabled devices.
The Conext SW is the device in a Xanbus system that typically provides network
power—500 mA at 12 VDC. All of the Xanbus-enabled devices, such as the
Conext SW, the SCP, and the AGS are able to communicate their settings and
activity to each other.
The Xanbus-enabled designation (see below) means that this product works on a
Xanbus network. Xanbus-enabled products are:
• Simple to operate and routine tasks are automated.
• Controlled by software that eliminates analog signalling errors.
• Less susceptible to interference and line loss.
• Upgradable through new software releases.
Figure 1-7 Xanbus System Diagram Example
Xanbus System Control Panel
Xanbus Automatic Generator Start
Solar
Charge
Controller
SCP
AGS
Conext SW
Xanbus Network _ _ _ _ _ _ _ _
network terminator
network terminator
Conext
ComBox
TM