Installation Manual

Installation Information
975-0637-01-01 Rev E 1–7
This guide for use by qualified personnel only
Installation Information
Before You Begin the Installation
Before beginning your installation:
• Read the entire Installation Guide so you can plan the installation from
beginning to end.
• Assemble all the tools and materials you require for the installation.
• Review the Important Safety Instructions on page v.
• Be aware of all safety and electrical codes which must be met.
Installation Codes
Applicable installation codes vary depending on the specific location and
application of the installation. Some examples are:
• IEC 60364
• BS 7671
• NF C 15-100
• AS/NZS 3000
• AS/NZS 5033
DANGER
ELECTRICAL SHOCK AND FIRE HAZARD
• All wiring must be done by qualified personnel to ensure compliance with
all applicable installation codes and regulations.
• Disconnect and lockout all AC and DC power sources.
• Disable and secure all AC and DC disconnect devices and automatic
generator starting devices.
Failure to follow these instructions will result in death or serious injury.
ConextSWEUROInstallationGuide.book Page 7 Tuesday, July 21, 2015 4:22 PM