Installation Manual

Installation Planning
975-0637-01-01 Rev E 1–15
This guide for use by qualified personnel only
Unpacking and Inspecting the Conext SW Inverter/Charger
To unpack and inspect:
1. Unpack the unit and check the materials list. If anything is missing from the
shipping box, contact your local Schneider Electric customer service
representative. See page ii for information.
2. Record the serial number of the Conext SW and other purchase information
in the beginning section under Information About Your System of the Conext
SW Inverter/Charger Owner’s Guide.
3. Save your purchase receipt to use as proof of purchase. This receipt is
required if the inverter/charger requires warranty service.
4. Save the original shipping carton and packing materials. If the inverter/
charger needs to be returned for service, it should be shipped in the original
carton. Packing the Conext SW in the original shipping carton is also a good
way to protect the inverter/charger if it ever needs to be moved.
CAUTION
HEAVY LOAD HAZARD
Do not lift the unit by yourself. Use two people to lift and mount the unit. Always
use proper lifting techniques during installation to prevent injury.
Failure to follow these instructions can result in injury.
IMPORTANT: Keep the carton and packing material in case you need to return
the Conext SW for servicing.
ConextSWEUROInstallationGuide.book Page 15 Tuesday, July 21, 2015 4:22 PM