Product Manual

Configuration via SCP
4–20 975-0636-01-01 Rev E
NOTE: If a warning is received indicating that a setting is not accepted by the
SCP, gradually increase the value of the setting until the SCP accepts it. This
type of warning means that an internal minimum threshold value is being crossed
and therefore the setting cannot be saved.
LithiumIon Battery Settings Menu
IMPORTANT: All settings for configuring a custom battery type are based on the
default settings for a flooded battery type.
Table 4-12 Custom Battery Settings Menu Description
Item Description
Eqlz Support Enables or disables the ability to enter an equalization cycle.
Refer to the battery manufacturer’s specifications to determine
whether equalization is recommended.
Eqlz
Voltage
a
a.The Eqlz Voltage setting is displayed when Eqlz Support is set to Enabled.
Selects the equalization voltage. Consult your battery
manufacturer for equalization voltage setting.
Bulk Voltage Sets the bulk voltage for a custom battery type. See note
below.
Absorb
Voltage
Sets the absorption voltage for a custom battery type.
Float
Voltage
Sets the float voltage for a custom battery type. See note
below.
Batt Temp
Comp
Battery temperature compensation for a custom battery type.
This setting is the coefficient that the BTS uses to adjust the
charging voltage when the temperature is above or below
25 °C.
WARNING
BATTERY TYPE HAZARD
When using Lithium Ion batteries, ensure that the battery pack being used
includes a Battery Management System (BMS) with safety controls.
Failure to follow this instruction can result in property damage, death
or serious injury.
ConextSWEUROwnersGuide.book Page 20 Thursday, July 23, 2015 3:32 PM