Datasheet

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Aug 20, 2012
1
Product data sheet
Characteristics
VDIP181646010
Actassi CL-MNC6 Patchcord U/UTP 4P Cat6
300MHz LSZH 1m Grey
Main
Range Actassi
Product Patch cord
Product compatibility Coloured clips blue
Coloured clips yellow
Coloured clips green
Coloured clips red
Performance 6
Colour Grey patchcord
Complementary
Provided equipment Coloured clips red
Coloured clips green
Coloured clips grey
Cable shielding type U/UTP
Communication network type 10GBASE-T
Transmission frequency 300 MHz
Input impedance 100 Ohm
Connector type RJ45
Material PE (polyethylene) wire insulation
Solid bare copper conductor
Standards ISO/IEC 11801:2011 Ed.2.2
EN 50173 Ed.3
EIA/TIA-568-C.2
IEC 61935-2
Product certifications Delta
Quantity per set 1
Cable length 1 m
Environment
Environmental characteristic LSZH (low smoke zero halogen) jacket
Temperature range -20...60 °C
Ambient air temperature for storage -20...60 °C
Ambient air temperature for installation 0...50 °C
Temperature resistance 60 °C