Product Manual

Monitoring Operation with the Conext SCP

975-0240-01-01 2–13

The Conext XW+ Home screen displays status information for the Conext XW+.

The screen appearance varies with the status of the Conext XW+ (standby,

inverting, etc.) For more information, see “Reading the Conext XW+ Home

Screen” on page 2–14.

To display the Conext XW+ Home screen:

• While viewing the System Status screen, press the down arrow key.

Viewing Other Screens

This section describes the next level of screens and menus on the Conext SCP.

Select Device Menu The Select Device menu displays a list of Xanbus-

enabled devices in the system, including the Conext XW+ and the Conext SCP.

From this menu you can access the Setup menus for each device in the system.

The Select Device menu also contains the Clock menu (where the time and

date are set) and the System Settings menu (where system-level settings can

be configured). These menus and the Conext SCP menu are available from the

Select Device menu, regardless of the number of Xanbus-enabled devices

installed.

To display the Select Device menu:

• While viewing the System Status screen, press Enter.

Device Setup Menus Device Setup menus display status information (on the

Meters screen) and changeable settings. Changeable settings are identified by

the square brackets [ ] around values in the right-hand column.

To display the Setup menu for a device:

• Highlight the device name on the Select Device menu and press Enter.

Alternatively, from the device Home screen, press Enter.

Reading the System Status Screen

The System Status screen displays:

Figure 2-5 Selecting a Device Setup Menu

Select Device

XW+ 6848

XW+ 6848 00: Setup

Meters

[Enabled]

[Disabled]

[Enabled]

[Bulk]

[Disabled]

[Operating]

Select device from list

and press Enter to view

Device Setup menu

Select Device menu Conext XW+ Setup menu

XW_Operation.book Page 13 Wednesday, August 12, 2015 2:39 PM