Product Manual

Configuration

3–2 975-0240-01-01

Using the Conext System Control Panel

The Conext XW+ is configured using the Conext SCP (Conext System Control

Panel). The Conext SCP provides access to settings relating to AC input and

output, battery charging, and grid-tie operation.

Conext XW+ Setup Menu

The Conext XW+

Setup

menu is accessible either from the system

Home

screen or

from the Conext XW+

Home

screen.

To navigate to the Conext XW+ Setup menu:

1. From the system Home screen, press Enter to view the Select Device menu.

Or from the Conext XW+ Home screen, press Enter. The Conext XW+ Setup

menu appears. Go to step 2.

2. Highlight the Conext XW+ device name, then press Enter.

Figure 3-1 Conext XW+ Setup Menu

Table 3-1 Conext XW+ Setup Menu

Menu Item Description

Meters Displays the Meters screen.

Inverter Enables or disables the inverter.

Search Mode Turns Search Mode on and off. See “Using Search Mode” on page 3–9.

XW+ 6848 00: Setup

Meters

[Enabled]

[Disabled]

[Enabled]

[None]

[Disabled]

[Operating]

Note: The Conext SCP only displays

four lines of the Setup menu at once. To

view additional settings, press the Down

arrow button.

XW_Operation.book Page 2 Wednesday, August 12, 2015 2:39 PM