Product Manual

Charger Settings Menu
975-0240-01-01 3–21
Further details about Lithium Ion support can be found in the document “Lithium
Ion Application Note (Document Number: 976-0319-01-01)” available at
solar.schneider-electric.com.
The Custom Battery Settings menu can be viewed if Custom is selected as the
Batt Type. This menu allows you to adjust charging and equalization voltage for
batteries with specifications that fall outside the default settings for the battery
types the Conext XW+ offers. You can also adjust the temperature compensation
constant for the battery temperature sensor on this menu.
Table 3-4 describes the items on the Custom Battery Settings menu.
WARNING
ADVANCED CONFIGURATION HAZARD
Advanced menu settings should be used by qualified personnel only.
Three phase operation should be configured by qualified personnel only.
Consult with the local utility before enabling Conext XW+ sell mode or grid
support functions.
Do not change these settings unless you are under the supervision and
direction of qualified personnel.
Failure to follow these instructions can result in death or serious injury.
Note: The default settings for configuring a custom battery type are based on the
default settings for a flooded battery type.
Table 3-4 Custom Battery Settings Menu
Item Description
Eqlz Support Enables or disables the ability to enter an equalization cycle. Refer to the battery
manufacturer’s specifications to determine whether equalization is recommended.
Eqlz Voltage
a
Selects the equalization voltage. Consult your battery manufacturer for equalization
voltage setting.
Bulk Voltage Sets the bulk voltage for a custom battery type.
Absorb Voltage Sets the absorption voltage for a custom battery type.
Float Voltage Sets the float voltage for a custom battery type.
XW_Operation.book Page 21 Wednesday, August 12, 2015 2:39 PM