Installation Guide

4
Installation
1
Preparing for installation
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□ Shut off the water supply.
□ Unscrew the nut (D), and remove the
washers (B & C).
2
Installing the faucet assembly
□ Before installation, ensure that the ange (F)
is placed on the bottom of the new faucet
assembly (A).
□ Insert the faucet body through the hole
in the sink.
NOTE: If installing the faucet assembly (A) without the
escutcheon, begin with step 2. If installing the faucet
assembly (A) with the escutcheon, begin with step 3.
NOTE: This step is for ange installation (optional). If the
ange will not be used, install the faucet assembly as
described in step 3.
A
D
C
B
E
A
F