Model# 67090W-6001 67090W-5001 SKU# 811-530 798-430 INSTALLATION AND CARE GUIDE TWO-HANDLE LAVATORY FAUCET Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY THANK YOU We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this lavatory faucet.
Table of Contents Important Information ..............................2 Warranty ...................................................2 Pre-Installation .........................................2 Planning Installation ..............................2 Tools and Hardware Required ...............2 Package Contents ..................................3 Installation ................................................4 Operation...................................................7 Care and Cleaning ......................
Pre-Installation (continued) PACKAGE CONTENTS Drain Assembly Faucet Assembly D* A N J E* L M B F* I* G* C K H* NOTE: *Items D - I come pre-assembled. Part Quantity Part Description Quantity A Description Faucet 1 H Drain body 1 B Gasket 1 I Ball nut 1 C Mounting nut 2 J Ball rod 1 D Pop up stopper 1 K Spring clip 1 E Drain flange 1 L Thumb screw 1 F Rubber washer 1 M Lift rod strap 1 G Lock nut 1 N Lift rod 1 3 HOMEDEPOT.
Installation 1 Installing the faucet assembly 2 Preparing the pop-up assembly CAUTION: Always turn off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle to relieve water pressure and ensure that the water is completely shut off. □ Shut off the water supply. Remove the old faucet. □ Clean the mounting surface. □ Ensure the gasket (B) is on the bottom of the new faucet (A). □ Place the faucet (A) through the mounting holes in the sink.
Installation (continued) 3 Installing the drain body □ Apply silicone sealant (not included) under the drain flange (E) and place the drain flange (E) into the drain hole of the sink. □ From underneath the sink, screw the drain body (H) onto the drain flange (E). Ensure that the opening (1) for the ball rod on the drain body (H) faces towards the rear of the sink. NOTE: In shallow cabinet installations, the ball rod (J) may need to be shortened.
Installation (continued) 5 Installing the lift rod □ 6 Attaching the ball rod and strap Insert the lift rod (N) through the faucet (A) and down into the lift rod strap (M). Tighten the thumb screw (L). □ Attach the ball rod (J) to the lift rod strap (M) using the spring clip (K). M N N K J 2 L 3 1 M 1 A 2 1 7 Adjusting the lift rod □ Loosen the thumb screw (L) on the lift rod strap (M). □ Push down on the lift rod (N) until the drain stopper is in the open position.
Installation (continued) the water supply 8 Making connections □ □ Use 1/2 in. I.P.S. faucet connections (2), or use supply line coupling nuts (3) (not included) with a 3/8 in. O.D. ball-nose riser (1). Use wrenches to tighten the connections. Do not overtighten. 1 3 2 Operation 1 Flushing and checking for leaks IMPORTANT: After installation is complete, remove the aerator to flush the water lines. Do not lose the gasket (1) in the aerator.
Care and Cleaning □ To clean, wipe down with a damp cloth and towel dry. □ Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will be voided. Troubleshooting NOTE: Refer to the service parts section in this manual for a detailed drawing showing the location of the parts listed below. Problem Possible Cause There are leaks from the handle. The bonnet nut has come loose and/or the washer is dirty or damaged. □ □ Clean or replace the washer.
Service Parts 1 2 13 3 9 4 5 6 Faucet ID tags can be found by removing the hot water handle 7 8 12 11 10 14 Part Description Part Number Part Description Part Number 1 Index C RP10029 9 Index H RP10028 2 Screw RP50013 10 Aerator RP30193* 3 Handle RP13305 11 Gasket RP80105 4 Bonnet nut RP70435 5 Washer RP64124 12 Drain assembly less lift rod RP40027* 6 Cartridge RP22010 13 Lift rod RP40051* 7 Cap RP10031* 14 Mounting nut RP56001 8 Seat & Spring RP22008
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Retain this manual for future use.
Modelo núm. 67090W-6001 67090W-5001 SKU núm. 811-530 798-430 GUÍA DE USO Y MANTENIMIENTO GRIFO PARA LAVAMANOS, DE DOS LLAVES ¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY GRACIAS Agradecemos la confianza que has depositado en Glacier Bay al comprar este grifo para lavamanos.
Tabla de contenido Información importante .........................12 Garantía...................................................12 Pre-instalación .......................................12 Planificación de la instalación .............12 Herramientas y herrajes necesarios ....12 Contenido del paquete .........................13 Instalación ..............................................14 Funcionamiento ......................................17 Cuidado y limpieza ................................
Pre-instalación (continuación) CONTENIDO DEL PAQUETE Ensamblaje del drenaje Ensamblaje de la mezcladora D* A N J E* L M B F* I* G* C K H* NOTA: *Los artículos D - I vienen preensamblados.
Instalación instalar el ensamblaje preparar el ensamblaje 1 Cómo 2 Cómo del grifo emergente PRECAUCIÓN: Cierra siempre el suministro de agua antes de quitar un grifo existente o reemplazar cualquier pieza de un grifo. Abre la llave del grifo para liberar la presión de agua y asegúrate de que el suministro de agua esté completamente cerrado. □ Cierra el suministro de agua. Retira el grifo anterior. □ Limpia la superficie de montaje.
Instalación (continuación) instalar el cuerpo del instalar el tapón y la 3 Cómo 4 Cómo drenaje varilla de bola □ Aplica sellador de silicona (no incluido) debajo de la brida del drenaje (E) y coloca ésta dentro del orificio de drenaje del lavabo. □ Desde la parte inferior del lavabo, enrosca el cuerpo del drenaje (H) en la brida del drenaje (E). Asegúrate de que la abertura (1) para la varilla de bola del cuerpo del drenaje (H) esté frente a la parte posterior del lavabo.
Instalación (continuación) instalar la varilla de 5 Cómo elevación □ fijar la varilla de bola 6 Como y la correa Inserta la varilla de elevación (N) a través de la mezcladora (A) y de la correa de la varilla de elevación (M). Aprieta el tornillo de ajuste manual (L). □ Fija la varilla de bola (J) a la correa de la varilla de elevación (M) con el sujetador de resorte (K).
Instalación (continuación) hacer las conexiones 8 Cómo del suministro de agua □ Usa conexiones de grifos de 1/2" IPS (2) o tuercas de acoplamiento de líneas de suministro (3) (no incluidas) con un tubo montante de bola de diámetro exterior de 3/8" (1). □ Usa llaves para apretar las conexiones. No aprietes demasiado. 1 3 2 Funcionamiento 1 Cómo purgar las tuberías y comprobar que no haya fugas IMPORTANTE: Después de terminar la instalación, retira el aireador para purgar las tuberías de agua.
Cuidado y limpieza □ Para limpiar, usa un paño húmedo y seca con una toalla. □ No uses limpiadores abrasivos, esponjas de alambre o productos químicos fuertes para limpiar esta mezcladora, pues ello anulará la garantía. Solución de problemas NOTA: Consulta la sección de piezas de repuesto de este manual para ver un dibujo detallado que muestra la ubicación de las piezas enumeradas a continuación. Problema Posible causa Hay filtración por el maneral.
Piezas de repuesto 1 2 13 3 9 4 5 6 Las etiquetas de identificación de la mezcladora pueden verse al quitar el maneral del agua caliente.
¿Problemas, preguntas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los sábados entre 9 a.m. y 6 p.m.(hora estándar del Este) 1-855-HD-GLACIER (1-855-434-5224) HOMEDEPOT.COM/GLACIERBAY Conserva este manual para uso futuro.