Installation Guide

9
1-2. Cutthexedpanel’sbottomsealstrip(N)tosizeandattachthestrip(N)onthexedglasspanel(C).
3-4. Mark the position of sliding door guide (Q) and drill the hole.
5. Install the sliding door guide (Q) using the screws (CC).
6-7. Placethexedglasspanel(C)intheslidingdoorguide(Q)andthetrack(B).
Note: The wall track (B) allows you to adjust the position of the xed glass panel (C). Adjusting the
depth and/or giving the xed glass panel a slight angle allows for precise alignment with the door.
8. Using a 3mm drill bit, drill pilot holes at the top, the center and the bottom of the rail (B).
9. Securethexedglasspanel(C)usingscrews(DD)andcap(EE)&tting(FF).
FIXED PANEL INSTALLATION
Helpful Hint
Add a drop of
silicone in the
holes before
inserting the
screws
40mm
N
N
C
20mm
714mm
Q
3
Φ4mm
4
CC
5
EE
DD
FF
1
Q
B
C
20mm
C
N
6
2
9
C
N
Q
7
8
100mm