Exploded Parts

1305H PAGE 4
1305H PAGE 5
20
You will need 8 - B10
25 Watts Recommended
60 Watts Max
Install bulbs and be sure
to test fixture BEFORE
trimming.
CAUTION: CAUTION:
CAUTION: CAUTION:
CAUTION:
Glass parts are fragile.
To avoid breakage use care when
assembling or cleaning.
WHEN ORDERING REPLACEMENTWHEN ORDERING REPLACEMENT
WHEN ORDERING REPLACEMENTWHEN ORDERING REPLACEMENT
WHEN ORDERING REPLACEMENT
ARM(S):ARM(S):
ARM(S):ARM(S):
ARM(S):
Give arm number from trim diagram
Give color code from the arm itself
l
l
COLOR
19
Install arms into washer. Line up holes in
arms with dimple in washer. Use nut to secure
arms in place.
Connect ground wire in each arm (silver wire) to
ground wire in center column. NO MORE THAN 5-
WIRES PER WIRE NUT. Use electrical tape to
secure wire nuts.
Connect white arm wires to neutral column wire
(ribbed or marked is neutral).
Connect black arm wires to the power wire in
column.
Carefully press wires as close as possible to the
underside of washer.
Attach metal enclosure with nut provided. Slide
spacer and glass dish up over stem pipe and
attach with rosette, round nut and half ball.
Install bobeches.
This end goes up
against washer.
A
9730
9729
9731
9731
ARM
WASHER
NUT
SPACER
#9735
ROSETTE
ROUND NUT
HALF BALL
9094/1S
9728/1
D
E
C
25
24
23
22
21
ARM TO ARM
DIMPLE
NUT
METAL
ENCLOSURE
B
F
27
26
G
9096/2S
9419