Installation and Assembly

RUNNING

THREAD

LOWER

FRAME

JACKCHAIN

FINIAL

LARGE HEX

NUT

SEATING RING

DECORATIVE BALL

WASHER

UPPER

FRAME

5897-__ __M PAGE 2

1 MAKE SURE POWER IS DISCONNECTED!!

2 Attach washer to supporting member in ceiling sufficient to support weight of

fixture.

3 Install upper frame assembly up over running thread to fit tight against the

washer and secure with large hex nut.

4 Again, make sure that power is disconnected. Connect power wires in

ceiling. Fixture MUST be grounded.

5 Attach lower frame assembly to upper frame assembly with nuts. Cover nuts

with seating ring and decorative balls.

6 Install bulbs, connect power and test fixture before trimming.

7 Attach finial assembly from half ball with metal jackchain. The finial assem-

bly should hang freely from the metal jackchain.

NOTES:

5897-__ __M PAGE 7

WARNING: THIS LUMINAIRE MUST BE MOUNTED OR

SUPPORTED INDEPENDENTLY OF AN OUTLET BOX.